A200s sartorius manual






















SARTORIUS ANALYTIC BALANCE MODEL A S This technical manual is an authentication of the manufacturer’s commercial literature and does not conform with the format and the content requirements normally associated with Army technical www.doorway.ru technical manual does, however, contain all . Sartorius. Do not open the AC adaptor. If glass breaks, there is a risk of injury posed by cuts on glass edges. Lay the cables where they pose no risk of causing someone to trip. Observe the additional safety and danger information in the following chapters. Buy Sartorius Balances at www.doorway.ru Visit www.doorway.ru to buy Sartorius Balances.  · connecting a Sartorius weighing instru-ment, please observe the “Guide to Verification" on the enclosed CD and the permitted weighing range as listed in the Declaration of Conformity. – EU legislation requires that a control seal be affixed to the verified device. The control seal consists of a sticker with the “Sartorius" logo. This seal.


Sartorius analytic. A S, A S, A P Electronic Analytical Balance Installation and Operating Instructions. 2 1 Weighing pan 2 Protective ring 3 Shield plate 4 Power receptacle 5 Level indicator 6 Leveling foot 7 ON/OFF key 8 CAL key 9 PRINT key (functions only if the 10 Menu access switch. The Sartorius part # YCCM2 RS Cable (5 feet in length) that we offer for $85 can connect to a DB-9 pin interface. The 25 pin side of the cable plugs into the balance's RS port and the 9 pin connector plugs into your computer's serial port. Sartorius's RS cable is unique pin out and not a standard cable and we can't stress this. The Sartorius AS is a sophisticated, benchtop sized, top-loading electronic balance with auto tare and auto calibration capabilities. Weighing capacity: g. Readability: mg. Standard deviation g ≤± Max. linearity g ≤± Stabilization time (typical) s 3. Housing (W x D x H) mm x x Pan size 9 cm. diameter.


Sartorius ASV1 Analytical Balance. Contact Data Weighing Systems for information, support or for a replacment unit. DWS understands scales and balances better than anyone and can find custom solutions perfect for any application. connecting a Sartorius weighing instru-ment, please observe the “Guide to Verification" on the enclosed CD and the permitted weighing range as listed in the Declaration of Conformity. – EU legislation requires that a control seal be affixed to the verified device. The control seal consists of a sticker with the “Sartorius" logo. This seal. SARTORIUS ANALYTIC BALANCE MODEL A S This technical manual is an authentication of the manufacturer’s commercial literature and does not conform with the format and the content requirements normally associated with Army technical www.doorway.ru technical manual does, however, contain all essential.

0コメント

  • 1000 / 1000